What are the requirements for data quality control in cable bridge construction?

在電纜橋架施工進程中，用到的資料有很多，除了電纜橋架和電纜外，還有很多附件，都需求人們嚴厲控制質量，從而保證電纜橋架的全體施工質量，保證電纜橋架可以正常投入運用。那麼，電纜橋架施工對資料質量的控制要求有哪些呢？比方橋架及其支吊架的質量、金屬型鋼的質量、螺栓的質量、電纜的質量及其他附件的質量等，都要嚴厲控制，保證電纜橋架裝置結實，全體質量波動。

In the process of cable bridge construction, there are a lot of data used. In addition to cable bridge and cable, there are many accessories, which require people to strictly control the quality, so as to ensure the overall construction quality of cable bridge and ensure the normal operation of cable bridge. What are the requirements for data quality control in cable bridge construction? For example, the quality of the bridge frame and its support and suspension frame, the quality of the metal section steel, the quality of bolts, the quality of cables and other accessories should be strictly controlled to ensure that the cable bridge device is strong and the quality of the whole body fluctuates.

1.各種規格的電纜橋架的直線段、彎通、橋架附件及支、吊架等有合格證，橋架內外應潤滑平整，無棱刺，不能有歪曲、翹邊等缺陷。

1. The straight section, bending, accessories, supports and suspensions of various specifications of cable bridge frames are qualified. The inside and outside of the bridge frame should be smooth and smooth, without prickles, without distortion and warping.

2.對電纜橋架外觀停止反省，保證外表防腐資料契合國度有關蛻變；橋架螺栓孔徑，在螺桿直徑不大于M16時，可比螺桿直徑大2mm，同一組內相鄰的兩孔間距±0.7mm；同一組內恣意兩孔間距±1mm，相鄰兩組的端孔間距±1.2mm。

2. Stop introspecting the appearance of the cable bridge to ensure that the external anti-corrosion data conform to the relevant transformation of the country; when the diameter of the bolt is not greater than M16, the diameter of the bolt is 2 mm larger than that of the screw, and the distance between the two adjacent holes in the same group is (+0.7 mm); the distance between the two holes in the same group is (+1 mm), and the distance between the end holes in the two adjacent groups is (+1.2 mm).

3.各種金屬型鋼不應有分明銹蝕，管內無毛刺，一切緊固螺栓，都應該采用鍍鋅件；收縮螺栓要依據允許拉力和剪力來選擇。

3. All kinds of metal profiles should not be clearly corroded, there are no burrs in the pipe, and all fastening bolts should be galvanized; shrinkage bolts should be selected according to the allowable tension and shear force.

4.每盤電纜上應標明電纜規格、型號、電壓等級、長度、出廠日期等，電纜盤應殘缺無損。電纜外觀殘缺無損，包裝殘缺，無壓扁、歪曲等成績。

4. Each cable shall be marked with cable specifications, models, voltage levels, lengths, date of departure, etc., and the cable disc shall be incomplete and undamaged. Cable appearance is incomplete and non-destructive, packaging is incomplete, no flattening, distortion and other achievements.

5.關于其他隸屬資料，比方電纜標示牌、油漆、汽油、封鉛、橡皮包布等都應契合質量要求，爲電纜橋架施工提供保證。

5. For other subordinate materials, such as cable signs, paints, gasoline, lead sealing, rubber wrapping, etc. should meet the quality requirements to ensure the construction of cable bridge.

總之，人們一定要留意對電纜橋架工程中各種資料的質量控制，保證電纜橋架的合理裝置。臨沂鑫天成電纜橋架廠是一家山東電纜橋架廠家，關于電纜橋架的材質、構造、工藝等都有很高的要求，供給的橋架品種也比擬多，可以滿足不同場所的使用要求，歡送廣闊客戶前來洽談協作。

In a word, people must pay attention to the quality control of all kinds of data in cable bridge construction to ensure the reasonable installation of cable bridge. Linyi Xintiancheng Cable Bridge Factory is a cable bridge manufacturer in Shandong Province. It has high requirements on the material, structure and technology of the cable bridge. There are many kinds of bridges available, which can meet the requirements of different places. Wide customers are welcomed to negotiate and cooperate.

綜上所述有濟南航豐實業有限公司提供，想了解更多山東電纜橋架知識，歡迎關注我們的網站：http://www.rtew.cn謝謝支持！

In summary, all the above-mentioned Jinan Hangfeng Industrial Co., Ltd. provides, want to know more about Shandong cable bridge, welcome to pay attention to our website: http://www.rtew.cn Thank you for your support!