What are the accessories of Shandong cable bridge? Below, Shandong cable bridge manufacturer will introduce to you the common accessories: tee, elbow, reducer, screw, buckle lock, supporting arm, suspender, cross arm, low seat, connecting piece and grounding wire.

電纜橋架的主要部件:電纜橋架安裝時的支托，是通過立柱和托臂來完成的。

Main components of cable tray: the support during cable tray installation is completed through column and support arm.

立柱是支撐電纜橋架的主要部件，而電纜橋架的荷重是通過托臂傳遞給立柱的。

The column is the main component supporting the cable tray, and the load of the cable tray is transmitted to the column through the bracket.

因此立柱和托臂是電纜橋架安裝的兩個主要部件。

Therefore, the column and bracket are the two main components for the installation of cable tray.

電纜橋架配件在各行各業中的用途：護罩與連接件本部分主要是梯級式、托盤式、槽式橋架配件，它包括調寬片、調高片、連接片、調角片、隔板護罩等。

Application of cable tray accessories in all walks of life: shield and connector this part is mainly ladder type, tray type and trough type bridge accessories, which includes width adjusting piece, height adjusting piece, connecting piece, angle adjusting piece, diaphragm shield, etc.

它是電纜橋架安裝中的變寬、變高、連接，水平和垂直走向中的小角度轉向，動力電纜與控制電纜的分隔等需要的附件。

It is an accessory required for widening, heightening and connection in cable tray installation, small angle steering in horizontal and vertical direction, separation of power cable and control cable, etc.

電纜橋架配件是電纜橋架中十分重要的部分。這樣的話對它的要求是十分嚴格的，因?yàn)槭切枰獞?yīng)用到一些比較重要的領域中去。

Cable tray accessories are a very important part of cable tray. In this case, the requirements for it are very strict, because it needs to be applied to some important fields.

主要包括各種電纜、管纜卡子和連接、緊固螺栓等一些橋架配件，所有連接、緊固螺栓電纜卡子全部鍍鋅，其它槽板、花孔角鐵表面處理分有靜電噴塑、鍍鋅、噴漆三種。

It mainly includes various cables, pipe and cable clips and some bridge accessories such as connecting and fastening bolts. All connecting and fastening bolts and cable clips are galvanized. The surface treatment of other trough plates and perforated angle iron includes electrostatic plastic spraying, galvanizing and painting.

按膨脹螺栓規格先用ZIC2-22型電陲（沖擊電鉆）鉆孔，然后插入膨脹螺栓。裝上工件，旋緊螺母。

According to the specification of expansion bolt, first drill with zic2-22 electric drill (impact electric drill), and then insert the expansion bolt. Install the workpiece and tighten the nut.

電纜橋架配件總體上的介紹：

General introduction of cable tray accessories:

電纜橋架系指電纜梯架、電纜托盤及金屬線槽。

Cable tray refers to cable ladder, cable tray and metal trunking.

電纜橋架主要有鋼制、鋁合金制及玻璃鋼制等。

Cable trays are mainly made of steel, aluminum alloy and FRP.

鋼制橋架配件表面處理分為噴漆、噴塑、電鍍鋅，熱鍍鋅、粉沫靜電噴涂等工藝。

The surface treatment of steel bridge accessories is divided into painting, plastic spraying, electro galvanizing, hot galvanizing, powder electrostatic spraying and other processes.

電纜橋架的安裝主要有沿頂板安裝。沿墻水平和垂直安裝、沿豎井安裝、沿地面安裝。

The cable tray is mainly installed along the top plate. Install horizontally and vertically along the wall, along the shaft, and along the ground.

沿電纜溝及管道支架安裝等。安裝所用支（吊）架可選用成品或自制。支（吊）架的固定方式主要有預埋鐵件上焊接，膨脹螺栓固定等。

Installation along cable trench and pipe support, etc. The support (hanger) used for installation can be finished products or self-made. The fixing methods of support (hanger) mainly include welding on embedded iron parts, expansion bolt fixing, etc.

以上內容就是山東電纜橋架廠家給大家講解的電纜橋架附件有哪些想必大家看完以上內容又了解了不少希望在以后在購買的過程中能給大家?guī)韼椭?/div>